Frigidaire FMF2K5BKQ0 Owner's Manual page 11

USER SERVICING INSTRUCTIONS
1. Grasp plug and remove from the receptacle or other outlet
device. Do not unplug by pulling on cord.
2. Open fuse cover. Slide open fuse access cover on top of
attachment plug towards blades.
3. Remove fuse carefully. Insert the tip of your tool into fuse slot
(close with the terminal), then prize the fuse gradually and
slowly, but not overexert. If you feel tight, you can try it at
several times and prize the fuse little by little. When one side of
the fuse has been prized, then you can get the fuse out entirely.
4. Risk of fire. Replace fuse only with 5 Amp, 125 Volt fuse.
5. Close fuse cover. Slide closed the fuse access cover on top of
attachment plug.
6. Risk of fire. Do not replace attachment plug. Contains a safety
device (fuse) that should not be removed. Discard product if the
attachment plug is damaged.
MISTING NOZZLE MAINTENANCE
If the misting nozzles become clogged, unscrew them from the fan grille
and soak in vinegar or a lime scale remover until they are clear of
buildup. Use a non-metallic brush to scrub them if necessary. If the
nozzles remain obstructed, contact customer service for replacement.
Warning: never try to clear the nozzles with pins or other sharp objects
as this can cause damage to the nozzles, affecting their efficiency.
If the misting hose valve becomes clogged, unscrew the head of the
valve and flush it with running water to clear debris. Make sure the
screen inside the misting hose is clean as well.
11