Table of Contents
Advertisement
The dryer is levelled using the
■
threaded feet.
Check the alignment of the
Note:
appliance with a spirit level and
correct if necessary. Change the
height by turning the appliance feet.
All appliance feet must stand firmly
on the ground.
Incorrect alignment may cause high
noise levels, vibrations and improper
movement of the drum.
If in doubt, have the appliance
Note:
connected by a specialist.
Changing the condensation
drain
Notes
The condensation from the dryer can
■
either be discharged into the
condensation container or drained
off via a connection to the waste-
water system. By default, the
condensation from the dryer is
discharged into the condensation
container.
If the condensation drain is installed,
■
residual water remains in the
condensation container due to the
dryer's self-cleaning function.
Installation and connection
Proceed as follows to change the
condensation drain:
Remove the accessories from the
1.
dryer drum.
When the dryer is delivered from the
2.
factory, the hose for discharging the
condensation into the condensation
container is fastened to the
connecting piece.
Disconnect the hose from the
3.
connecting piece and put it in the
"parked" position.
Take the drain hose from the
4.
accessories and secure it to the free
connecting piece.
en
15
Advertisement
Table of Contents
