Table of Contents
Advertisement
Home Connect
en
Connecting to your home
network manually
If you have already automatically
connected your appliance to your home
network, you can skip the manual
connection step and connect it to the
Home Connect app ~ Page 33.
If your router does not have a WPS
function, you will need to connect the
appliance to your home network
manually.
Wi-Fi must be switched on on the
appliance.
Switch the appliance on.
1.
Press and hold the } button for
2.
more than 3 seconds.
'ž£ (connect automatically) will
appear on the display panel.
Turn the programme selector to
3.
position 2. †'˜ (connect manually)
will appear on the display panel.
Press the Start button to connect. †
4.
will flash on the display panel.
The appliance will now set up its
own Wi-Fi network with the name
(SSID) HomeConnect which you can
access from your smartphone or
tablet PC.
Call up the Wi-Fi settings on your
5.
smartphone or tablet PC.
32
Connect your smartphone or
6.
tablet PC to the HomeConnect Wi-Fi
network and enter the password
(key) "HomeConnect".
The connection process may
Note:
take up to 60 seconds.
Once you have connected
7.
successfully, open the
Home Connect app on your
smartphone or tablet PC.
In the Home Connect app, enter the
8.
name (SSID) and password (key) for
your home network and then select
Transfer to appliance.
If the appliance has connected to your
home network successfully, ™©Ÿ
(connected) will appear on the display
panel and † will remain lit
continuously.
You can exit the Home Connect
9.
settings by pressing the } button.
Notes
If a connection could not be
■
established, "§§ (fault) will appear
on the display panel.Check whether
your appliance is in range of your
home network and try connecting
manually again.
If your smartphone or tablet PC is
■
still connected to the HomeConnect
network, you will need to connect it
to your home network first.
Advertisement
Table of Contents
