White Rodgers 1F97W-71 Operation Manual page 26

temperature (HEAT A). At the right of the
display is the currently programmed HEAT A
setting.
3. Press either
temperature to your selected HEAT A setting
(if you only want to program a temperature for
HEAT A, skip to step 7.)
VIEW
4. Press once. The letter A will change to
TEMP
the letter B, representing HEAT B.
5. Press either
temperature to your selected HEAT B setting (if
you only want to program temperatures for
HEAT A and HEAT B, skip to step 7).
6. Repeat steps 4 and 5 to select HEAT C and
HEAT D temperature settings, if desired.
RUN
7. Press .
PRGM
SYSTEM
8. Press until COOL is displayed.
HEAT-OFF-COOL-AUTO
26
or to change the
or to change the
VIEW
9. Press once. The display will show
TEMP
COOL and A, representing the first pro-
grammed cooling temperature (COOL A).
10. Press either
temperature to your selected COOL A setting
(if you only want to program a temperature for
COOL A, skip to step 13).
VIEW
11. Press once. Press
TEMP
your selected COOL B setting (if you only
want to program temperatures for COOL A
and COOL B, skip to step 13).
12. Repeat step 11 to select COOL C and COOL
D temperature settings, if desired.
RUN
13. Press .
PRGM
or to change the
or to set