White Rodgers 1F97W-71 Operation Manual page 25

SET
3. Press once. The display window will
CLOCK
show the hour only.
EXAMPLE:
4. Press and hold either
reach the correct hour and AM/PM designa-
tion (AM begins at midnight; PM begins at
noon).
SET
5. Press once. The display will show the
CLOCK
day of the week as an abbreviation (MON for
Monday, TUE for Tuesday, etc.).
6. Press and hold either
reach the current day of the week.
RUN
7. Press once. The display will show the
PRGM
correct time and room temperature alternately.
TIME TIME
or until you
FWD BACK
TIME TIME
or until you
FWD BACK
Select Heating and Cooling Temperatures
During programming, if you don't press any but-
tons for 5 minutes, the thermostat will enter the
HOLD mode and will maintain a constant tempera-
ture. The display will revert to the alternating time/
temperature display. To resume programming
after this happens, press
point where you stopped programming. Then you
may continue to enter your programs normally. If
you want to stop programming at any time, simply
RUN
press to resume program operation.
PRGM
SYSTEM
1. Press until HEAT is displayed.
HEAT-OFF-COOL-AUTO
VIEW
2. Press once. The display will continue to
TEMP
show HEAT. Below HEAT is the letter A,
representing the first programmed heating
VIEW
until you are at the
PRGM
25