GE ASV06 User And Care & Installaion Manual page 13

3. INSTALL CABINETIN WALL.
1" long #1 O wood screws and secure cabinet
top to frame with four 1" long #1 O wood screws.
Drill holes in cabinet sides and top, if necessary
for proper installation. If frame is oversize, use
shims to prevent cabinet distortion.
4. Caulk all four sides on the outdoor side of
cabinet to prevent moisture from getiing
through to the interior wall. Use of flashing (a
piece of aluminum or galvanized steel available
at most hardware stores) will futiher prevent
moisture from getting into interior walls.
5. For a tight seal along the bottom of the unit, caulk
around the botiom rail. Install wood trim molding
(obtained locally) around roomside projection of
cabinet, if desired.
Brick Veneer~
L i n t e l Anale — - -
Holes for
#10 1" Long
Wood Screws
0
/
o
INSIDE
o
4. SLIDE CHASSIS INTO CABINET
cabinet. Do not push on controls or finned
coils. Make sure chassis is firmly seated
toward rear of cabinet.
5. INSTALL CHASSIS RETAINING
SCREWS.
Reinstall chassis-to<abinet retaining screws
2.
removed in Step
6. INSTALL FILTER AND GRILLE
See &reandChan/hgsmfibn.
13