GE ASV06 User And Care & Installaion Manual page 10

4. A~ACH SUPPORTBRACKETS TO
Select the suppoti bracket position that will
place the bracket near the outermost point on the
window sill. Using eight Type B screws, atiach
support brackets to each side of cabinet botiom.
5. A~ACH SEAL STRIP TO WINDOW
to window width.
2. Remove backing from seal strip and attach
strip to underside of the botiom window sash.
10
/
6. INSTALL CABINETIN WINDOW.
1.
Place air conditioner cabinet into window with
frame on the top of the cabinet positioned just
in front of the bottom sash. Pull window down
until it rests on the air conditioner cabinet just
behind the front flange of frame on the top of
the cabinet.
2. Locate three screw holes along the cabinet
foam gasket. Center cabinet, side to side, in
window and mount it to window sill using
three Type D screws through the foam
gasket and cabinet botiom.
3. Thread the Type C bolts into the support
brackets, making sure the cabinet maintains
a slightly downward slant to the outside.
A 1/4" slant, cabinet front to rear, is desirable.