on cabinet just behind the window filler
panel frames.
2. Slide filler panels outward until they touch window
sash tracks. Secure panels by putiing four Type A
screws through mounting holes in panels and
driving them into window sash and sill.
8.
SLIDE CHASSIS INTO CABINEE
2. Reinseti foam gasket (removed in Step 2)
between bottom of chassis and inside
bottom of cabinet.
3. Reinstall chassis-to+abinet retaining screws
removed in Step 2.
9. INSTALL SASH-GAP GASKEZ
Cut foam sash-gap gasket to window width and
stuff it between window sashes.
Attach right angle safety lock (Type E bracket)
with Type A screw as shown.
11. REINSTALL THE GRILLE
See instructions in the Care and Cleaning
section.
Some installations may require additional sealing
around the window and air conditioner. Check for
air leaks and seal.
Gasket
See netipage for Through-th*Wall
Installation Instructions
Type E
Bracket
11