Table of Contents
Advertisement
FagronLab™ PRO-DMS
5. Proper use
The device is specially designed for mixing and/or heating
liquids in pharmacies, laboratories or factories.
•
Observe the minimum distances between the devices,
between the device and the wall and above the
assembly (min. 100 mm).
> 100 mm
Figure 1. Minimum distance between the devices
6. Review
Unpacking
Unpack the equipment carefully and check for any
damages may have arisen during transport. Please contact
supplier for technical support.
Note:
•
If there is any apparent damage to the
system, please do not plug it into the
power cable.
Listing of items
The package includes the following items:
Items
Main unit
Power cable
Magnetic stirrer
User manual
7. Trial and custom use
•
Make sure that the required operating voltage matches
with the power supply voltage.
•
Ensure that the socket is properly grounded.
•
Plug in the power cable, ensure the power is on and
begin initializing.
•
Add the medium into the vessel with an appropriate
stirring bar.
•
Place vessel on the work plate.
•
Set the desirable stirring speed.
•
Set the desirable temperature.
•
Stop both heating and stirring functions. If these
operations above are normal, the device is ready for use.
If these operations are not normal, the device may be
damaged during transportation, please contact supplier
for technical support.
•
Use a FagronLab™ magnetic rod to remove safely the
stirring bar from the vessel.
Warning:
•
Forbid to transfer the vessel when the
device working.
FagronLab™ PRO DMS – User Manual | 6
Qty
1
1
1
1
Advertisement
Table of Contents
