Maintenance And Cleaning; Associated Standards And Regulations - Fagron FagronLab PRO-DMS User Manual

FagronLab™ PRO-DMS

13. Maintenance and cleaning

• Proper maintenance can keep the device working properly and lengthen its lifetime.
• Do not spray cleanser into the device when cleaning.
• Unplug the power cable when cleaning.
• Only use recommended cleansers to maximize the life of your FagronLab™ PRO-DMS device.
Substance
Dyes
Construction materials
Cosmetics
Foodstuffs
Fuels
• Before using other method for cleaning or decontamination, the user must ascertain according to the manufacturer that
this method will not harm the device. Wear the proper protective gloves during cleaning the device.
Note:
• Electronic device can not clean with cleanser.
• If you require maintenance service, the device must be cleaned in advance to avoid pollution, and be
sent back into original packaging.
• If the device is going to be out of use for a long time, please switch the device off and place it in a
stable, dry, room temperature and clean location.

14. Associated standards and regulations

Construction in accordance with the following safety standards:
EN 61010-1
UL 3101-1
CAN/CSA C22.2(1010-1)
EN 61010-2-10
Construction in accordance with the following EMC standards:
EN 61326-1
Associated EU guidelines:
EMC-guidelines: 89/336/EWG
Instrument guidelines: 73/023/EWG
Cleaning agent
Isopropyl alcohol
Water containing tenside / Isopropyl alcohol
Water containing tenside / Isopropyl alcohol
Water containing tenside
Water containing tenside
FagronLab™ PRO DMS – User Manual | 11