Night Owl IC8 Series User Manual page 37

The Custom Record Schedule Menu allows the user to set each individual camera to record Continuously
or by Motion. Select the type of recording you would like to activate. Click and drag your cursor over the
table to fill the desired date and time blocks. Click and drag over active blocks to deselect. By default, all
channels are set to 24/7 Motion.
This next section of the Startup Wizard is for setting the motion detection area of your camera. To set a
privacy mask, deselect the desired area. To deselect an area, use your mouse to click on individual boxes.
If you wish to deselect the entire area, right click your mouse and choose Clear all. You may then proceed
to click and drag the area you want selected. To exit, right click your mouse and choose Return.
37