Water Resistant Treatment - Canon NEW F-1 Service Manual

18.

Water resistant treatment

1. Inject silicone in the space between
the front panel and the lower body
"obi" (band).
2. Put the rubber seal in the groove and
apply silicone (KE-347B) on it.
3. Apply grease (GE-C9) between the
shutter button'assembly and the
release lock ring.
Canon NEW F-1 Service manual
4. Use the teflon washer in the release
5. Place the teflon washer in the shutter
6. Put two types of teflon washers in the
Page 68
lock lever.
dial seat under the shutter dial.
ASA dial.