Notes To Siprotec Objects - Siemens SIPROTEC 7SD80 Manual

1

Notes to SIPROTEC objects

This chapter contains notes for the use and evaluation of certain SIPROTEC objects which are available via
DNP3.0 communication.
The description of the standard mappings / point lists (refer to chapter 3) contains the pre-allocation of the map-
ping files at delivery or first assignment of a mapping in DIGSI 4 to the SIPROTEC device.
Changes of the allocation and the scaling of the measured values are possible in adaptation to the concrete
installation enviroment.
1.1 Binary Inputs / Annunciations
1.2 Binary Outputs / Commands
1.3 Analog Inputs / Measured values
1.4 Metered measurands
SIPROTEC, 7SD80, Bus mapping DNP 3.0
C53000-L2040-C347-1, Edition 07.2011
10
11
12
13
9