Summary of Contents for LaCie Little Big Disk Thunderbolt 2
Page 1
Consider the following before connecting your LaCie Little Big Disk Thunderbolt 2: To reach transfer rates of up to 20Gb/s bi-directional, the Little Big Disk Thunderbolt 2 must be connected to a computer that supports Thunderbolt 2 technology. Connecting the Little Big Disk Thunderbolt 2 to a computer that supports first generation Thunderbolt technology allows for transfer rates up to 10Gb/s bi-directional.
Page 2
ATTACH THE STAND LaCie recommends attaching the included stand before connecting the Little Big Disk Thunderbolt 2 to your computer. Use the screws and hex key (Allen wrench) shipped with your device when following the instructions below. DO NOT attach the stand while the device is powered on.
Page 4
CONNECT THE CABLES Follow the setup steps in the order they are given to ensure that the volume mounts correctly on your computer. Connect the included Thunderbolt cable to one of the enclosure's Thunderbolt 2 ports. Plug the other end of the cable to a compatible Thunderbolt 2 or first generation Thunderbolt technology port on your computer.
Page 5
The device will turn on automatically and the volume will mount on the desktop. Getting Connected...
Page 6
RECEIVING POWER To receive power, the enclosure must be: Connected to a power source via the included power supply Connected to a computer or powered device compatible with Thunderbolt 2 technology or first generation Thunderbolt technology UNMOUNTING THE VOLUMES In order to avoid file system corruption, it is important to unmount the volume before turning off the enclosure or disconnecting the interface cable.
Need help?
Do you have a question about the Little Big Disk Thunderbolt 2 and is the answer not in the manual?
Questions and answers