Download Print this page
Mooer Micro Series Owner's Manual

Mooer Micro Series Owner's Manual

Distortion pedal
Hide thumbs Also See for Micro Series:

Advertisement

Available languages

Available languages

Quick Links

HP: High peak mode, boost up the bottom-end, when increasing
distortion by Drive knob, you will get more volume and a slight
increase in high-mid range (around 3.5KHz).
LP: Low peak mode, color up extreme little to the original sound, very
nice for clean boosting.
3
6
7
8
9
4
5
1
Effects Modes: 2 (HP, LP)
Input: 1/4" monaural jack (impedance: 470k Ohms)
Output: 1/4" monaural jack (impedance: 1k Ohms)
Power Requirements: AC adapter 9V DC (center minus plug)
Current Draw: 6 mA
Dimensions: 93.5mm (D) × 42mm (W) × 52mm (H)
Weight: 150g
Accessories: Owner's Manual
*
Disclaimer: Any specification's update won't be amended in this manual.
1. TRUE BYPASS
Footswitch:
Push down the footswitch
to switch between effects
and bypass status.
2. ON/OFF LED:
Instructs effects or bypass
status of Hustle Drive, when
the LED is lit up, the effects
is on.
3. DC IN Power Jack:
For power supply, use a 9-volt
DC regulated AC adapter(plug
polarity is positive on the barrel
and negative in the center).
4. INPUT Jack:
1/4" mono audio jack, for
connecting guitar.
5. OUTPUT Jack:
1/4" mono audio jack, outputs
the signal.

Advertisement

loading

Summary of Contents for Mooer Micro Series

  • Page 1 HP: High peak mode, boost up the bottom-end, when increasing distortion by Drive knob, you will get more volume and a slight increase in high-mid range (around 3.5KHz). LP: Low peak mode, color up extreme little to the original sound, very nice for clean boosting.
  • Page 2 模 式 说 明 HP: High Peak模式,增强低频,当增益增大时,音量会变大且中高 频会得到一定提升(3.5kHz左右) 。 。 : Low Peak模式,对原始信号进行极小的染色,出色的Clean Boost 失真单块 面 板 说 明 1. 纯直通脚踏开关: 用户 手册 踩下脚踏开关以选择效果的开关。 2. LED指示灯: 显示Hustle Drive的工作状态,当 注意 事项 指示灯亮时为效果开启。 *使用前请仔细阅读* 3. 电源接口: 电源供应 电源供给,使用9V直流变压器(内负 外正)。 请使用正 确 的 交 流电源插座连 接 电 源 变压器。 请使用内...

This manual is also suitable for:

Hustle driveMe mds 2282005