Post Behavior - Dell Latitude 3300 Setup And Specifications Manual

Option
Block Sleep
Peak Shift
Advanced Battery Charge
Configuration
Primary Battery Charge
Configuration

Post behavior

Table 31. POST Behavior
Option
Adapter Warnings
Numlock Enable
Fn Lock Options
Fastboot
28 Podešavanje sistema
Description
This option lets you to block entering to sleep in OS environment.
This option is not set by default.
Allows you enable of disable the Peak shift feature. This feature, when enabled, minimizes the AC power
usage at times of peak demand. Battery does not charge between the Peak Shift start and end time
Peak Shift Start and End Time can be configured for all weekdays
This option set the battery threshold value (15 % to 100 %)
This option enables you to maximize the battery health. By enabling this option, your system uses the
standard charging algorithm and other techniques, during the non-work hours to improve the battery
health.
Advanced Battery Charge Mode can be configured for all weekdays
Allows you to select the charging mode for the battery.
The options are:
• Adaptive—Default
• Standard - Fully charges your battery at a standard rate.
• ExpressCharge- The battery charges over a shorter period of time using Dell's fast charging
technology.
• Primarily AC use
• Custom
If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.
NOTE: All charging modes may not be available for all the batteries.
Description
Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power
adapters.
• Enable Adapter Warnings—Default
Allows you to enable or disable the Numlock function when the system boots.
• Enable Numlock—Default
Allows you to let hot key combinations Fn + Esc toggle the primary behavior of F1–F12, between their
standard and secondary functions. If you disable this option, you cannot dynamically toggle the primary
behavior of these keys.
• Fn Lock—Default
Click one of the following options:
• Lock Mode Disable/Standard—Default
• Lock Mode Enable/Secondary
Allows you to speed up the boot process by bypassing some of the compatibility steps.
Click one of the following options:
• Minimal—Default
• Thorough
• Auto