Power Management - Dell Latitude 3300 Setup And Specifications Manual

Option
C-States Control
Hyper-Thread Control

Power management

Table 30. Power Management
Option
AC Behavior
Enable Intel Speed Shift
technology
Auto On Time
USB Wake Support
Wireless Radio Control
Wake on LAN /WLAN
Description
Allows you to enable or disable the computer from turning on automatically when an AC adapter is
connected.
• Wake on AC
This option is not set by default.
This option is used to enable/disable Intel Speed Shift Technology.
This option is not enabled by default.
Allows you to set the time at which the computer must turn on automatically.
The options are:
• Disabled—Default
• Every Day
• Weekdays
• Select Days
This option is not set by default.
Allows you to enable USB devices to wake the system from standby.
• Enable USB Wake Support
• Wake on Dell USB-C Dock—Default
This option if enabled, will sense the connection of the system to a wired network and subsequently
disable the selected wireless radios (WLAN and/or WWAN). Upon disconnection from the wired network
the selected wireless radio will be enabled.
• Control WLAN radio
This option is not set by default.
This option allows the computer to power up from the off state when triggered by a special LAN signal.
Wake-up from the Standby state is unaffected by this setting and must be enabled in the operating
system. This feature only works when the computer is connected to AC power supply.
• Disabled—Default - Does not allow the system to power on by special LAN signals when it receives
a wake-up signal from the LAN or wireless LAN.
• LAN or WLAN - Allows the system to be powered on by special LAN or WLAN signals.
• LAN Only - Allows the system to be powered on by special LAN signals.
• WLAN Only - Allows the system to be powered on by special WLAN signals.
• LAN with PXE Boot A wake up packet is sent to the system in either the S4 or S5
Description
Allows you to enable or disable the additional processor sleep
states.
• C states
This option is set by default.
Allows you to enable or disable the HyperThreading in the
processor.
• Disabled
• Enabled—Default
Podešavanje sistema 27