Page 1
Your Parrot Bebop-Pro Thermal™ contains the following items: A Parrot Bebop-Pro Thermal™ drone; A Parrot Skycontroller 2™ lever. You can fly your Parrot Bebop-Pro thermal with the Parrot Skycontroller 2 by downloading the FreeFlight Thermal™ app to your tablet. This app is free of charge but might contain In-App Purchase offers.
Page 2
WARNING The Parrot Bebop-Pro thermal IS NOT A TOY. It should not be used or handled by a child under the age of 14 years. BEFORE USING the Parrot Bebop-Pro thermal: (A) READ CAREFULLY this User Guide and all information and documentation available at www.parrot.com, which may...
Page 3
PRESENTATION OF THE PARROT BEBOP-PRO THERMAL Thermal-imaging camera On/Off button LED light Power Battery Camera...
Page 4
PRESENTATION OF THE PARROT SKYCONTROLLER 2 Antenna Smartphone holder location On/Off button During the flight: take a Take off/ picture Settings Land In the settings menu: Return to confirm departure point During flight: start/stop video recording In the settings menu: return...
Page 5
Switch to direct view or thermal view Set the camera exposure USB port Vertical orien- tation of the HD camera Change the display mode on the application.
Page 6
PRESENTATION OF THE FLIR ONE PRO CAMERA Type C USB port for data transfer Type C USB port for charging ON/OFF button Do not interchange USB type C ports for charging and data transfer.
25 minutes. CHARGING THE BAT TERY OF THE PARROT SKYCONTROLLER 2 1. Take the adapter appropriate to your country and fix it on the charger. 2. Connect the charger cable to Parrot Skycontroller 2, then plug the charger into the mains.
Page 8
CHECKING THE PROPELLERS Place and lock the propellers on the engines of the Parrot Bebop-Pro Power as shown in Figure 1 using the supplied propeller mounting tool (Figure 2).
FIT TING THE BAT TERY Slide the Parrot Bebop-Pro Thermal battery in until you hear a click. The latch on the back of the battery must be in the lower position (Figure 3). Check that the Flir One Pro camera is in a horizontal position before handling the battery.
Do not fly the drone over water. • Make sure you have at least 80 meters in diameter of clear space for your Bebop-Pro Thermal to take off and land. Make sure the airfield has no obstacles that may hinder piloting or prevent visual flight.
Page 11
BEBOP-PRO THERMAL • Make sure that the Bebop-Pro Thermal has detected the GPS signal. • Make sure the Bebop-Pro Thermal propellers are properly mounted and secured. • Make sure the Bebop Thermal battery is charged. • Make sure you have enough memory for video recording.
Page 12
CONNECT THE PARROT SKYCONTROLLER 2 TO YOUR PARROT BEBOP-PRO THERMAL 1. Place the Parrot Bebop-Pro Thermal on a flat surface. 2. Turn on your Parrot Bebop-Pro Thermal. 3. Press the ON/OFF button on the Parrot Skycontroller 2 to turn it on.
Page 13
2. Press the right button on the holder to fully open it. 3. Position your tablet on the holder. 4. Tighten the holder on your tablet. 5. Turn on Parrot Skycontroller 2 and your drone. 6. Using your tablet's USB cable, connect your tablet to the Parrot Skycontroller 2's USB port.
> In flight, the drone adapts to the direction of control according to the chosen view. TAKING OFF Press the button on your Parrot Skycontroller 2. > The Parrot Bebop-Pro Thermal takes off and stabi- lises at 1 metre from the ground while commands are pending.
Page 15
FLYING LEFT CONTROL RIGHT CONTROL STICK Thermal Go up Go forward Thermal Go down Go backward Thermal Rotate right Move right Thermal Rotate left Move left...
Page 16
RETURN TO STARTING POSITION To return the Parrot Bebop-Pro Thermal to its starting point, press the button on the Parrot Skycontroller 2. > The Parrot Bebop-Pro thermal returns to its star- ting position. Make sure you are in an open environment.
Page 17
The Parrot Skycontroller 2 is trying to connect to a drone. > Make sure your drone is on. The battery of the Parrot Skycontroller 2 or your Flashing red light drone is low. > Recharge the battery. The Parrot Skycontroller 2 has detected a problem with the drone.
Page 18
PARROT BEBOP-PRO THERMAL You can control the Solid blue Parrot Bebop-Pro thermal. The Parrot Bebop-Pro Blue flashing slowly thermal is starting up. An engine error has been detected. To locate the defective engine: In the FreeFlight Pro Blue flashing quickly app, go to Fly &...
TECHNICAL SPECIFICATIONS BEBOP-PRO THERMAL • Front HD Camera • Flir One Pro thermal imaging camera • 32 GB internal memory • Operating range: 0° - 35°C • Autonomy of flight: 25 minutes • Weight: 600g FLIR ONE PRO • Thermal resolution: 160 x 120 •...
PARROT SKYCONTROLLER 2 The Parrot Skycontroller 2 is intended to fly the Bebop Drone, the Parrot Bebop 2 and the Parrot-Pro Thermal and is not suitable for children under 14 years of age. Check the list of drones that are compatible with the Parrot Skycontroller 2 in the Support section on www.parrot.com.
Page 21
WARRANTY For warranty conditions, please refer to the general terms and conditions of the retailer from which you purchased the Parrot Skycontroller 2, the Parrot Be- bop-Pro Thermal and the Flir One. HOW TO RECYCLE THIS PRODUCT (PARROT SKYCONTROLLER 2 AND PARROT BEBOP-PRO...
EU DECLARATION OF CONFORMITY (PARROT SKYCONTROLLER 2) The Parrot Skycontroller 2 can be used in: DE, AT, BE, BG, CY, HR, DK, ES, EE, FI, FR, GR, HU, IR, IT, LV, LT, LU, MT, NL, PL, PT, CZ, RO, GB, SK, SI, SE.
Page 23
BATTERY (PARROT SKYCONTROLLER 2, PARROT BEBOP-PRO THERMAL AND FLIR ONE PRO) WARNING: Failure to follow all the instructions may result in serious injury, ir- reparable damage to the battery and may cause a fire, smoke or explosion.
MANUFACTURER INFORMATION Parrot Bebop-Pro Thermal and Parrot Skycontroller 2 are manufactured by: Parrot Drones SAS - 174 Quai de Jemmapes - 75010 Paris (France) - Corporate and Trade Register of Paris 808 408 074 - www.parrot.com The Flir One Pro is manufactured by: FLIR Systems, Inc. - 27700 SW Parkway...
Need help?
Do you have a question about the Bebop-Pro Thermal and is the answer not in the manual?
Questions and answers