Table of Contents
Advertisement
4
PARAMETER SETTINGS /
UTILISATION
4.1 REMOTE PANEL.
Key:
1 - Main parameters switch with
button to confirm and save data
2 - Access key and settings lock
3 - Return button to the previous
screen
4 - Display
4.2 DESCRIPTION OF SYMBOLS.
Symbol
Description
Forced start set
Absence set / pending
Current hot water temperature
Stand-by
Warning
Electrical integration in oper-
ation
Heat pump in operation
Boiler integration in operation
Reception of a signal at the inlet
of the solar system
Reception of a signal at the inlet
of the photovoltaic system /
Smart Grid
4
2
1
3
4.3 MAIN MENU.
Access to the settings by pressing the "Access
key and settings lock" (
) (2 Fig. 4-1) and
follow the instructions on the screen (4 Fig. 4-1).
Navigate the menu by turning the main switch
(1 Fig. 4-1) to the left to decrease the values or
to the right to increase the values.
Press the main switch in the centre (Fig 1. 4-1)
to confirm.
4-2
MENU
BOOST function
Funzione BOOST
Manual mode
Modalità
MANUALE
Modalità ASSENZA
ABSENCE mode
Information
Informazioni
Settings
Impostazioni
Max. preparation of hot water
Max. preparazione di acqua calda
in un periodo di tempo
over a period of time
programmato in anticipo
previously scheduled.
• BOOST function (
Increase the production of hot water regularly;
Set the number of the BOOST operation days
(from 1 to 7). At the end of the chosen period,
the boiler resumes operation with the initial
settings. The BOOST can be interrupted at
any time:
BOOST pause
.
• OPERATION mode (
).
Chose the operating mode
Select AUTO or MANUAL (see section 4.6
"Operating modes").
18
• ABSENCE mode (
Schedule an absence.
It allows you to indicate in the boiler:
- a permanent absence from the current date;
- a scheduled absence (set the start date of
the absence and the end date). On the eve
of your return, an anti-legionella cycle is
activated. In this period, the water temper-
ature is kept above 15°C. The function can
be stopped at any time:
Disable absence
• Information ( ).
- Display the energy savings.
Allows you to view the utilization rate of
the heat pump and electrical integration
of the last 7 days, the last 12 months, from
commissioning.
- Display power consumption.
It allows you to view energy consumption in
kW / hour, in recent days, in recent months,
in recent years.
- Display the budget parameters.
It allows you to view all the settings recorded
in the boiler.
• Settings (
).
- Set the time and date.
Set the day and then confirm. Then set the
month, year, hour and minutes.
- Set the operating time slots
It lets you define the time slots in which the
device is authorized to start.
- Set the language.
French, English, Dutch, Spanish, Portu-
guese, German, Italian and Polish.
- Electrical integration.
It allows you to turn off the support of elec-
trical integration.
4-1
).
.
).
Advertisement
Table of Contents
