How To Use - Real Spirit Advanced PureAir APA-7500 Owner's Manual

HOW TO USE

Control Panel Functions
1. Power
2. Auto Mode
3. Air Quality Indicator
4. Silent Mode
5. Air Speed Manual Adjust
Control Panel Indicators
6. Air Speed Indicator
7. Filter Change Indicator
8. Photosensitive Sensor
9. Air Quality Indicator
Plug into power 110/120V outlet
The LED on the control panel light will
blink twice.
Power
When powered on, the indicator will be lit,
and will be in ready mode after 1 flash.
Now press the power button to start the
air purifier. The air quality sensor should
be ready within the first 1-2 mins. The
unit will then sense the air quality and
reflect the air quality by the different
indicator colors.
AUTO
SILENT
Air Quality Indicator
NOTE:
The indicator light reflect the current air
quality status
www.AdvancedPureAir.com
Filter Replacement Indicator
(Replace filter when the filter
indicator light is on.)
(#7)
Auto Mode:
When plugged in, the air purifier will go
into ready mode, press power button, it
will start and operate at a speed based
on the current air quality.
AUTO AIR QUALITY INDICATOR
SILENT
Note:
If you want to turn off the air quality
indicator light, press the air quality light
button.
Note:
When operating in stand-by power, the
dust sensor is not operating, and the air
quality sensor will not work.
6
Air Speed Indicator
(#6)
Silent mode button
(#4)
Air Quality Indicator
with ColorRing™
Technology
(#9)
Blue
Green
Purple
Red
Air speed adjustment button
(#5)
Power button
(#1)
Automatic Mode Button
(#2)
Photosensitive sensor
Do not block light
sensitive device
(#8)
Air quality indicator
light switch
(#3)
Excellent
Good
Average
Poor
1-888-601-5886