SAFETY INFORMATION Please exercise caution using the Air Purifier or any other electrical device! This manual describes safety precautions which should be observed with your air purifier. Please review carefully BEFORE using your APA-7500 SPECIAL ATTENTION The voltage rating for air purifiers sold in the US To prevent the possibility of electrical shock or is AC110-120V, 50-60Hz, short-circuiting your air purifier, Do NOT place...
PRODUCT INTRODUCTION Air Quality Indicator with ColorRing™ Handle Technology Air Vents Air Quality Sensor Filter Reset Button (Inside) Air Intake (Both Sides) Back Panel Front Panel Base Control Panel Filter Set Note: Filter packaging must be removed before operating Front Panel Pre-Filter Cold Catalyst Filter HEPA Filter with HEPA-GUARD™...
Page 5
PRODUCT INTRODUCTION Function Description Control Panel Air Speed Indicator Air speed adjustment button Filter Replacement Indicator (Replace filter when the filter Power button indicator light is on.) Automatic Mode Button Silent mode button Air quality indicator light switch Photosensitive sensor Do not block light sensitive device.
SETTING UP YOUR APA-7500 Operating Steps: 4. Peel off/remove all the filter packing materials. For the first time using air purifier, please follow below steps to get the filters correctly installed. 1. Peel off all the packing materials and put the air purifier on a dry, stable, flat 5.
KNOW THE FILTERS 3. Activated Carbon Filter Screen Control Panel Activated carbon may remove many odors and chemical substances in the air with highly effective absorptions particles. With thousands of pores, each particle can provide a large surface area to absorb volatile organic compounds (VOCs) and offensive odors in the air we breathe, and chemicals in the air.
HOW TO USE Control Panel Functions Air Speed Indicator Air speed adjustment button (#6) (#5) 1. Power Filter Replacement Indicator Power button (Replace filter when the filter (#1) 2. Auto Mode indicator light is on.) (#7) Automatic Mode Button 3. Air Quality Indicator (#2) 4.
Page 9
HOW TO USE Silent Mode: Night Mode: Press the SILENT button. The relevant In automatic mode, when indoor light on the control panel should now be environment darkens, the air purifier will automatically switch to night mode. Return to automatic mode, just press the Note: AUTO button.
CLEANING • Be sure to unplug the power before 2. Removed the cover of the sensor. cleaning your air purifier. • Do not immerse your air purifier in water, or any liquid. • Do not use abrasive, corrosive, or flammable detergents (such as bleach or alcohol) NOTE: Compound filters ARE NOT washable.
FILTER MAINTENANCE Filter Maintenance and Cleaning Information It’s recommended to clean and maintain the pre-filter every 2 months (about 480 hours, based on 8 hours a day, 7 days a week for normal indoor household use.) Please turn off the power and unplug before cleaning and maintenance 5.
CHANGING FILTERS When to replace filters: 5. Reinstall the front panel, align, insert If used on average of 8 hours per day and into the fixed groove, then press the 7 days per week, in a normal household top of the machine to secure the front environment.
TROUBLESHOOTING List of common problems that may be encountered when using this product. If you cannot solve the problem based on the following information, please contact Customer Service at 1-888-601-5886 Status Possible Cause Possible Solution The air purifier won’t The front panel may not be Remove front panel.
Page 14
FILTER SCHEDULE We highly suggest the Pre-Filter be cleaned (please refer to page 9 for details) every 2 months, and all other filters replaced every 6 months with normal indoor household usage, 8 hours per day 7 days per week (Please refer to page 10 for instructions on how to replace the filters.
Page 16
• Upon inspection, if under warranty Real Spirit USA will repair or replace with a new or refurbished unit, or an upgrade to similar or higher grade product. Shipping paid back to original purchaser by Real Spirit USA (within the contiguous United States).