Table of Contents
Advertisement
5. Connecting the Cables
5.1. Power cables
AC power input is via a standard IEC inlet socket. Operating voltage must only be
changed by an authorized service agent.
The quality of the power cable will affect the sound quality accordingly.
5.2. Signal Cables
You can connect 1 unbalanced (RCA) and 1 balanced (XLR) source device at the
same time. The selector switch is above the input connectors.
5.3. Speaker Cables
Speaker binding posts can handle spade lugs, banana plugs or bare wire.
Polyethylene knobs are chosen instead of metal ones to reduce extra conductor
mass and eddy currents. Do not overtight them, the higher friction of the
polyethylene should safely secure the cables in place.
You can connect any speaker with 4Ω impedance or above. The Hybrid Mono
Amplifier can maintain output specifications into impedance variations down to 2.5Ω.
CAUTION: Negative (black) speaker binding posts are not at ground level
electrically. Do not connect them to chassis ground, or to each other in any way.
7
ABSOLARE Hybrid Mono Amplifier User Manual 1.2
Advertisement
Table of Contents
