5.2.
S ignal
C ables
........................
7 6.
O perating
t he
U nit
........................
7 8.
T echnical
S pecifications
......................
9 ABSOLARE Preamplifier User Manual 0.9...
1.
General
Description
The Absolare Preamplifier is a single chassis line stage preamplifier with an all tube signal path and point-to-point construction. Inside the chassis, mains transformers and DC regulators are isolated from the signal section by an internal partition, to further reduce noise and hum.
E80CC in Signature and Altius versions. 12AU7 / ECC82 tubes have one missing pin acting as a correct positioning key. Align missing pin with the missing hole in the tube socket while inserting. ABSOLARE Preamplifier User Manual 0.9...
RCA or transformer balanced XLR depending on the version. 6.
Operating
the
Unit
Absolare Preamplifier will be ready to operate seconds after turning on the power, but attaining full performance may take 15 to 30 minutes. Signal ground and chassis/power ground is separate inside the Signal Stage and they are connected by a high pass filter to reduce hum and noise.
- Check grounding of input cables. Input selector does not work. - Check all DC power cords. If the problem is persistent, contact your nearest ABSOLARE dealer. 8.
Technical
Specifications
- All tube signal section, Single-Ended architecture in both models.