Wlan Settings - Access Point - WolfVision vSolution Cynap Core Integration Manual

Identity
Anonymous Identity
Authentication Method
Root Certificate
2.2. WLAN settings – access point
Mode OFF
Mode Access Point
Channel
SSID Auto
SSID Manual
IP address
Subnet mask
Encryption
Transmit Power
Hint:
Cynap Core does not act as router or gateway and only serves up a "Cynap Core closed"
network that will not connect to the internet even if the LAN port is connected to the internet.
Feb. 20
WolfVision GmbH
Oberes Ried 14
A-6833 Klaus / AUSTRIA
Login credentials to connect Cynap Core in a protected
network. (802.1x).
The identity to be used on an unencrypted session before
Identity is being validated on an encrypted session.
Supported are PEAP with MSCHAPv2 and TTLS-PAP
Only root certificates are supported, load the certificate by
using the Web Interface through the WLAN interface.
Allowed certificates:
•
root certificate (CA) with common file extension .crt
Base-64-coded X.509 encoded DER certificate
•
Privacy Enhanced Mail with common file
extension .perm
Base-64-coded X.509 encoded DER certificate
certificate stored between 2 tags: "---Begin Certificate---"and" --
----End Certificate-----"
Disable access point.
Enable access point.
Defines the channel used for wireless communication. For
optimum performance, select a currently unused channel.
If activated, an automatic SSID is generated using the Cynap
Core serial number
Defines the network name in plain text for easy identification of
the WLAN network.
Following characters are supported:
- AaBbCcDdEeFfGgHhIiJjKkLlMmNnOoPpQqRrSsTtUuV
vWwXxYyZz
- ÄäÖöÜü
- 0123456789
- _-:$& ()
Defines the IP address of the access point. Cynap Core acts as
a DHCP server and provides the necessary network settings to
the connected devices.
Available IP addresses can be limited. A commonly used
subnet mask would be 255.255.255.0
Defines encryption for safe network traffic. All connected
devices must use the same algorithm (WPA2).
Select the desired transmission power to optimize the range.
The maximum power depends on selected channel and region.
4
Tel. +43-5523-52250
Fax +43-5523-52249
E-Mail: wolfvision@wolfvision.com
www.wolfvision.com
R. Theiner