Cynap Core Connection To A Visualizer - WolfVision vSolution Cynap Core Integration Manual

3.4. Cynap Core connection to a Visualizer

Cynap Core has a dedicated LAN port for connecting to a Visualizer with built-in DHCP
server functionality. Activate on the Visualizer to obtain all necessary network settings from
Cynap Core automatically. Communication between Visualizer and Cynap Core is over the
Wolfprot protocol. The connection between Cynap Core and the Visualizer is a direct
connection (point to point) and shouldn't be made through a switch or similar device.
More information on this protocol can be found on our website in the support section
www.wolfvision.com.
Feb. 20
WolfVision GmbH
Oberes Ried 14
A-6833 Klaus / AUSTRIA
12
Tel. +43-5523-52250
Fax +43-5523-52249
E-Mail: wolfvision@wolfvision.com
www.wolfvision.com
R. Theiner