Download Print this page

Advertisement

Quick Links

ZVOX SB380 Soundbar
SETUP & OPERATION
Face Front
Face Up
Wall Mount
zvox.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the SB380 and is the answer not in the manual?

Questions and answers

Cheryl
January 31, 2025

How to correct Code 8888

Subscribe to Our Youtube Channel

Summary of Contents for Zvox Audio SB380

  • Page 1 ZVOX SB380 Soundbar SETUP & OPERATION Face Front Face Up Wall Mount zvox.com...
  • Page 2: Important Safety Instructions

    These mounting sites will securely NOT covered under the terms of the ZVOX hold a screwhead that is no larger than 3/8” Audio limited warranty. Safety - SB380 Soundbar...
  • Page 3 90 mm (3 9/16") 743 mm (29 1/4") 902 mm (35.5") Depth 84.5 mm (3 5/16") Audio cables supplied with the ZVOX SB380 Audio Signal Cables Supplied With The standard optical plug analog miniplug left and right RCA plugs...
  • Page 4: Wall Mount

    Quick Setup Guide The ZVOX Soundbar Model SB380 is often referred to as the The quick guide assumes an optical digital audio connection If your TV does not have an optical connector, you can also “ZVOX speaker” or “SB380” in this User Manual.
  • Page 5 TV until it is inaudible. supplied optical cable to this optical into the toslink connector on your TV. Use the ZVOX remote control to set the SB380 jack. Connect the other end of the opti- The optical plug and jack are not square.
  • Page 6 Once you have connected the cable to the ZVOX speaker, follow step 4 at the other end of the cable into the SB380’s red and white RCA jacks on page 3 of this manual. After you have turned on the ZVOX speaker, labeled “ANALOG INPUT”.
  • Page 7 In2d on the SB380 soundbar’s display. To connect between the cable box red and white jacks and the ZVOX speaker, identify the cable supplied with the SB380 that has a red and white RCA plugs at If You Have A Coaxial Digital each end.
  • Page 8 There are three general placement options, illustrated above: • Do not place any objects on top of a soundbar. sites. A ZVOX Audio soundbar weighs between 15 and 20 pounds. Face Front: You can place the soundbar on a flat surface so it faces •...
  • Page 9 Press this button to mute the ZVOX speaker. When the MUTE function is active, the display blinks “-00-”. Input Selection The SB380 will enter Standby if it is left in MUTE for longer than five minutes. Press the INPUT button on the ZVOX AccuVoice remote to select between the speaker’s...
  • Page 10 PS16, PS17 or PS18. For further information about the options provided by the PS menu, see the separate information sheet Soundbar Adjust- ment Options, available online at ZVOX Audio’s website. Remote Control and End Panel - SB380 Soundbar...
  • Page 11: Usa Warranty

    The OTHER SETTINGS button can be used to adjust the analog RCA jacks input (Input 3) for a second audio source. SB380 so it responds to one of many cable, satellite or TV This second source could be the headphone output of a remote controls.
  • Page 12 © 2019 ZVOX Audio LLC. SB380 manual 8/19 100380US www.zvox.com...