Custom Audio Electronics SR500NM Short Manual

THE CE MARK AFFIXED TO THE GENERAL INSTRUCTIONS
PRODUCT CERTIFY THAT THE
PRODUCT SATISFIES THE BASIC
CUSTOM S.p.A. declines all responsibility for accidents
SAFETY REQUIREMENTS. or damage to persons or property occurring as a result
The device is in conformity with the essential
unsuitable or incorrect installations, environments not
Electromagnetic Compatibility and Electric Safety
in keeping with the equipment's protection degree or
requirements laid down in Directives 2014/30/EU and with the required temperature and humidity conditions,
2014/35/EU. failure to carry out maintenance and periodical
inspections and poor repair work.
The device is in conformity with the essential
This document provides a description of the main
requirements laid down in Directives 2014/53/EU about
features of the device. For a detailed description
devices equipped with intentional radiators
of all functions such as maintenance and cleaning
The Declaration of Conformity and other available
please refer to the user manual available on www.
custom4u.it
custom4u.it.
The images used in this manual are used as an
illustrative examples. They couldn't reproduce the
described model faithfully.
manual are referred to all models in production at the
issue date of this document.
GUIDELINES FOR
THE DISPOSAL OF
THE PRODUCT
GENERAL SAFETY INFORMATION
The crossed-out rubbish bin logo means that used
Your attention is drawn to the following actions that
electrical and electronic products shall NOT be mixed
could compromise the characteristics of the product:
with unsorted municipal waste. For more detailed
• Read and retain the instructions which follow.
information about recycling of this product, refer to the
• Follow all indications and instructions given on the
instructions of your country for the disposal of these
device.
products.
• Make sure that the surface on which the device rests
• Do not dispose of this equipment as miscellaneous
solid municipal waste, but arrange to have it collected is stable. If it is not, the device could fall, seriously
damaging it.
separately.
• The re-use or correct recycling of the electronic and •
electrical equipment (EEE) is important in order to
protect the environment and the wellbeing of humans.
in this manual.
• In accordance with European Directive WEEE • When positioning the device, make sure cables do
2002/96/EC, special collection points are available
not get damaged.
to which to deliver waste electrical and electronic
• Before any type of work is done on the machine,
equipment and the equipment can also be handed
disconnect the power supply.
over to a distributor at the moment of purchasing a
• Take care the operating temperature range of
new equivalent type.
equipment and its ancillary components.
• The public administration and producers of electrical
• Do not block the ventilation openings.
and electronic equipment are involved in facilitating
• Do not insert objects inside the device as this could
the processes of the re-use and recovery of waste
cause short-circuiting or damage components that
electrical and electronic equipment through the
could jeopardize printer functioning.
organisation of collection activities and the use of
• Do not carry out repairs on the device yourself, except
appropriate planning arrangements.
for the normal maintenance operations given in the
• Unauthorised disposal of waste electrical and
user manual.
electronic equipment is punishable by law with the
appropriate penalties. • The equipment must be accessible on these
components only to trained, authorized personnel.
• Periodically perform scheduled maintenance on the
device to avoid dirt build-up that could compromise
the correct, safe operation of the unit.
•
beam from a mirrored surface, it may cause pain.
• Unplug or turn off the device be sure to stop the
led beam before cleaning the portion of the device
where LED light is generated and received (emitter/
receiver). Otherwise, exposure may cause pain.
CUSTOM S.p.A.
Via Berettine 2/B
43010 Fontevivo (PARMA) - Italy
Tel. : +39 0521-680111
Fax : +39 0521-610701
http: www.custom.biz
Customer Service Department:
www.custom4u.it
© 2019 CUSTOM S.p.A. – Italy.
All rights reserved. Total or partial reproduction of this manual in whatever form, whether by printed or electronic
means, is forbidden. While guaranteeing that the information contained in it has been carefully checked, CUSTOM
S.p.A. and other entities utilized in the realization of this manual bear no responsibility for how the manual is used.
Information regarding any errors found in it or suggestions on how it could be improved are appreciated. Since products
are subject to continuous check and improvement, CUSTOM S.p.A. reserves the right to make changes in information
Other company and product names mentioned herein may be trademarks of their respective companies. Mention of
third-party products is for informational purposes only and constitutes neither an endorsement nor a recommendation.
CUSTOM S.p.A. assumes no responsibility with regard to the performance or use of these products.
CUSTOM S.p.A.
World Headquarters
Via Berettine, 2/B - 43010 Fontevivo, Parma ITALY
Tel. +39 0521 680111 - Fax +39 0521 610701
info@custom.biz - www.custom.biz
All rights reserved
www.custom.biz
SHORT GUIDE
SR500NM