Advertisement
Step 15
Unfold the BACK (J) and lay it over your unit.
å
Fasten the BACK (J) to your unit using the NAILS (1N).
å
NOTE: Be sure to tap NAILS into the holes that line up over
å
the UPRIGHT (C), SMALL UPRIGHT (D), and SHELF (G).
NOTE: Perforations have been provided for access through
å
the BACK. Carefully cut out the holes needed.
Push the FOOT (23E) into the hole in the BOTTOM (F).
å
The BACK should be against
the bottom surface of the TOP.
These holes must line up
over the URIGHT (C), SMALL
UPRIGHT (D), and SHELF (G).
Caution
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
NAIL
(45 used in this step)
J
F
23E
1N
Page 19
Advertisement
