Teknik Barrister Home 5414729 Instruction Booklet page 10

Step 6
Fasten the MOLDINGS (M and N) to the TOP (E). Tighten
å
two TWIST-LOCK® FASTENERS.
Page 10
M
How to use the SAUDER TWIST-LOCK
1. Insert the dowel end of the FASTENER into the hole of the
adjoining part.
NOTE: The dowel end of the FASTENER must remain fully
inserted in the hole of the adjoining part while locking
the FASTENER.
2. Tighten the FASTENER with a Phillips screwdriver as tight
as possible.
E
® FASTENER
Dowel end
N