Teknik Barrister Home 5414729 Instruction Booklet page 17

Step 13
Fasten an END MOLDING (T) to the RIGHT END (A).
å
Tighten two HIDDEN CAMS.
Fasten the other END MOLDING (T) to the LEFT END (B).
å
Use two BLACK 9/16" LARGE HEAD SCREWS (1S).
Fasten two CORNER BRACKETS (31G) to the BASES (P
å
and Q) and BOTTOM (F). Use eight BLACK 9/16" LARGE
HEAD SCREWS (1S).
Fasten two METAL BRACKETS (4G) to the BOTTOM (F).
å
Use two BLACK 9/16" LARGE HEAD SCREWS (1S).
NOTE: Be sure the BRACKETS are even with the edges of
å
the BOTTOM.
Fasten the BASE (O) to the CORNER BRACKETS (31G)
å
and METAL BRACKETS (4G). Use six BLACK 9/16"
LARGE HEAD SCREWS (1S).
31G
These edges
should be even.
4G
F
P
A
Maximum
210 degrees
Minimum
190 degrees
31G
Q
B
O
T
BLACK 9/16" LARGE HEAD SCREW
Arrow
These edges
should be even.
T
Use the small holes
in this MOLDING (T).
1S
(18 used in this step)
Page 17