Advertisement
Powering
To ensure proper operation, the microphone requires a phantom power source providing 48 Volts
according to IEC 61938.
Safety and maintenance
Cleaning the microphone
After every use, clean the microphone with a dry, soft cloth tissue and store it in a solid case or a
zipper pouch.
Technical Specifications
Capsule
Polar patterns
Frequency range
Sensitivity
Max. SPL (0.5% THD)
Equivalent noise level
Dynamic range
Signal-to-noise ratio
Powering
Electrical Impedance
Recommended load impedance
Current consumption
Connectivity
Dimensions
Weight
Risk of damage
Do not connect the microphone to any power supply other than a
phantom power source (input with phantom power or external IEC
standard phantom power supply) with a floating connector, using a
balanced cable with studio grade connectors to IEC 268-12 only. This is
the only way to ensure safe and reliable operation.
Risk of damage
Please make sure that the piece of equipment to which your microphone
will be connected fulfils the safety regulations enforced in your country
and is fitted with a ground lead.
2/3" condenser capsule
Supercardioid
20 – 20,000 Hz
16 mV/Pa (-36 dBV)
135 dB
SPL
16 dB
119 dB
78dB
48 Volts according to IEC 61938
<200 Ohms
>1k Ohms
3.9 mA
3-pin male XLR connector
Diameter: 47.5 mm (1.87 in.) Length 182 mm (7.17 in.)
293 g (10.34 oz.)
3
Advertisement
