Table of Contents
Advertisement
OPERATION
Option Select Mode
Entering Option Select Mode allows you to customize
options such as Tone Select, Compass Select, Abbreviated
Power Up Sequence and VG-2 Mode. When selecting
options, the
,
or
must be pressed within 20 seconds
or options mode will automatically be exited. To enter:
Press
:
*Display
To Change,
(Quiet)
For 2 seconds
COMBO
2nd time
TONE 3
3rd time
TEST YES
4th time
VG2 OFF
5th time
SAFETY
ON
6th time
VOICE
ON
7th time
B SVR
ON
8th time
X
Yes
9th time
K
Yes
10th time
Ka
Yes
11th time
Laser
Yes
*Factory settings.
16
Press
anytime to exit.
Option:
Reads:
Press
or
Combo=Radar & Compass
Radar=No Compass
Compass=No Radar
= YES
Tone 1, 2, or 3
= NO
(3 different X, K, Ka
patterns)
= ON
X, K, Ka Audio tones
= OFF
1 beep during
Power Up
= ON
Turns VG-2 On
= OFF
Turns VG-2 Off
= ON
Turns Safety Radar On
= OFF
Turns Safety Radar Off
= ON
Real Voice engaged
= OFF
Real Voice disengaged
= ON
Battery Saver On
= OFF
Battery Saver Off
= ON
X Band On
= OFF
X Band Off
= ON
K Band On
= OFF
K Band Off
= ON
Ka Band On
= OFF
Ka Band Off
= ON
Laser On
= OFF
Laser Off
OPERATION
Teach/Tutorial Mode
Provides simulated alerts for each type of signal.
• Press City and
(Quiet) simultaneously and release.
Display reads:
Quiet mode can also be accessed while Teach/Tutorial
mode is engaged.
• Press
(Power/Play) to exit.
Memo Mode
Record up to nine distinct message tracks for a total of 90
seconds, one 90 second message or any combination in
between.
IMPORTANT: Unit does not detect radar or laser signals
during recording or while playing a memo.
WARNING!!! Memo mode is not intended to be used
while you are driving. You should not use any device in a
vehicle that may distract you from observing the road
ahead.
To record or play a message (Memo mode):
• Press memo button and release. The unit will beep once;
this enters Memo mode. Display reads:
PLAY
RECORD
MEMO
17
Advertisement
Table of Contents
