Niche Dimensions - Miele PTD 701 Connection Diagram

Niche dimensions

If the machine is to be installed into a counter, the following niche dimensions must be adhered to.
It is not necessary to secure the machine in the counter.
In the vicinity of the machine, use furniture that is appropriate for commercial areas in order to prevent damage to the
machine due to steam.
Standard
PTD 701 PTD 702
+35
A 725 725
B 460 600
C 603 603
D 730-750 730-750
E 470-480 610-620
F 605 605
Dimensions in mm
Further machine dimensions can be found on page 9
PTD 701 AE RO, PTD 702 AE RO
Dimensions in mm
Page 14
62
PTD 703 PTD 704
+35 +35
820 820
600 600
603 637
825-845 825-845
610-620 610-620
605 640
62
Subject to technical alterations; 2020-07
We recommend the assembly on 3 adjustable feet so
that the installed machine can be easily adjusted in the
height.
Remove the two rear adjustable feet (1/2) before mov-
ing the machine into the niche.
Install the adjustable foot (3) with the shorter thread
(lies in the machine).
+35
PTD 701 AE RO
+35
A 820
B 460
C 603
D 825-855
E 470-480
F 605
The machine can also be installed without feet.
However, it can then no longer be adjusted.
Height of the machine without feet: 810
PTD 702 AE RO
+35
A 820
B 600
C 603
D 825-855
E 610-620
F 605
+5
mm