P.Lindberg 9054676 Original Manual page 23

1.
Start by fitting the gate frame to the side
frame on the right and left side.
Depending on the calf hutch's width, you
may choose which bolt holes to use.
Bolt everything together using four 8 x 45
bolts and tighten.
P. Lindberg A/S
Tel.: +45 70212626
2.
Once the front gate frame is fitted and
tightened, attach all four wheels to the
side frames (can be fitted on either the
exterior or interior side, as desired).
Tighten the bolt and nut but do not
over tighten – the wheels should be
able to turn easily and without
wobbling.
3
Sdr. Ringvej 1
6600 Vejen, Denmark
MAN 9054676 EN V1
www.p-lindberg.dk
E-mail: salg@p-lindberg.dk