Wolf E Series Service Manual page 2

Hide thumbs Also See for E Series:

Electronics

PANEL ASSEMBLY LAYOUT

???

Display Area

The panel assembly has two display areas. The inner text display provides information for setting, programming and

diagnosing the oven. The outer display shows mode, temperature and time.

OK Knob

The OK Knob rotates clockwise and counter-clockwise to display different options, and to adjust temperature. The

Push the OK knob to select an option. To access special modes including Gourmet, Slow Roast, My Recipes, Keep

Warm, Self-Cleaning, and User Settings, pres the OK knob when no mode is active.

Buttons

Warm -

The Warm button is a short cut button to the special mode of Keep Warm. When the Warm mode is on, the

Warm icon illuminates, the convection fan comes on, and the oven heats to 175° F. The temperature does not

display in Warm mode. The Off button does not cancel the Warm mode. To turn Warm mode off, press the

Warm button again.

Light - No Icon

Press the Light button to turn the lights on or off. If the door is closed, the button turns the oven cavity lights on

or off. When the oven door is opened, turning on the lights, the Light button turns the oven cavity lights off.

Closing the door resets the oven cavity lights so that when the door is opened again, the lights come on.

Temp -

Press the Temperature button to adjust the temperature when a mode is active. The temperature icon and the

the temperature flash. Adjust temperatures up or down. Press the OK knob to select the displayed temperature.

#826752 - Revision A - June, 2016

375

Demo-Modus

Off

Figure 2-1. SO24 Panel Assembly

24" E Series Oven (SO24)

2-2

8 : 30

So24