Bajaj Discover 110 Manual page 12

Control Switch - RH
E. Starter Button : It operates the electric starter
when clutch lever is depressed with transmission
in any gear. It is recommended to start engine
with transmission in neutral.
F. Light Switch : It has 2 positions. When igntion
switch is 'ON', lighting system will work as per
given table.
: Taillamp will get ON & DRL ON .
: Head lamp, Tail lamp, Number plate
lamp, Speedometer illumination will get
ON & DRL remains ON (Low intensity)
11
F
E
(High Intensity)
Day Running Light Feature:
• Day Running light is provided inside the
headlamp.
• Day Running light gets ON (High intensity)
when ignition switch is turned to ON position.
• After headlight is turned to ON position,
intensity of DRL LED's will get reduced.
Day Time
Running Light
(DRL)
Igntion
Light
Switch Switch
ON OFF
ON ON
Note: The inside of the lamp lens might fog up after
using the motorcycle in rain or after washing. Fog inside
the lamp lens will disappear gradually by switching on
the lamp while driving the motorcycle. The amount of
time it takes for the fog to disperse depends on the
humidity of the ambient air. Fog in non functional areas
other than reflector does not affect the lamp performance.
DRL Head
Light
ON High Intensity
OFF
ON
ON Low Intensity