Ss Brewtech Keg WaSsher Manual

Ss Brewtech Keg WaSsher Manual

Advertisement

Keg WaSsher
© Ss Brewtech 2017
Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Keg WaSsher and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ss Brewtech Keg WaSsher

  • Page 1 Keg WaSsher © Ss Brewtech 2017 Page 1...
  • Page 2 Assembly Video https://youtu.be/Q4rLVjnS7pE © Ss Brewtech 2017 Page 2...
  • Page 3 Then insert the outlet side of the pump into the compression seal, ensuring a snug fit. Install the Silicone Pump Intake Cover onto the intake side of the pump. The Keg WaSsher is now fully assembled and ready for use. © Ss Brewtech 2017 Page 3...
  • Page 4 Take care to align the Clamp Nut with the widest part of the keg’s lid opening. Once the CIP ball is inserted, tilt the Keg WaSsher so that one of the Clamp Nut’s locking bars fits into the keg’s lid opening.
  • Page 5 Never run the pump dry. Doing so will cause irreparable damage to the internal compo- nents, and void all warranties. **WARNING** Only use the Keg WaSsher with the recommended cleaning and sanitizing products con- tained within this quick start guide. **WARNING** Always use a GFCI outlet for the 24V DC power supply, and avoid any liquid contact with the power supply’s electrical components.

Table of Contents