Advertisement
SupraSlim SnapFrame LED Light Box™ - SUL Series
Before beginning, read precautions on back of page
1. Mount the french cleat bracket(s) to the wall using screws and anchors appropriate for your wall.
2. Lift open the sides of the frame, put on gloves and carefully insert the graphic, making sure not to slide
the graphic inside the frame.
3. Slide the frame on top of the wall bracket(s) using the french cleat bracket(s) mounted on the frame.
4. Connect the male and female connectors of power cord, then plug cord into power source.
1.
2.
3.
Before beginning,
read precautions on
back of page
4.
SUL1824 shown
Version: 1
Page 1 of 2
Advertisement
Table of Contents
Related Manuals for Testrite Visual SupraSlim SnapFrame SUL Series
Summary of Contents for Testrite Visual SupraSlim SnapFrame SUL Series
- Page 1 SupraSlim SnapFrame LED Light Box™ - SUL Series Before beginning, read precautions on back of page 1. Mount the french cleat bracket(s) to the wall using screws and anchors appropriate for your wall. 2. Lift open the sides of the frame, put on gloves and carefully insert the graphic, making sure not to slide the graphic inside the frame.
- Page 2 SupraSlim SnapFrame LED Light Box™ - SUL Series Important Handling Instructions Unpacking Instructions • Handle with care when unpacking • Big frames will need two people • Cloth gloves are suggested (included) • Unpack in a clean and dust-free environment Graphic/Duratrans and Liner Insertion •...
Need help?
Do you have a question about the SupraSlim SnapFrame SUL Series and is the answer not in the manual?
Questions and answers