Cycle Options - Whirlpool RAB3121EW0 Use And Care Manual

OPER A T IN G YO UR W A S HE R
Selecting a cycle, time, and temperature
Use the information in this section to help
you make the best cycle selections for your
wash loads. Each cycle is designed for
different types of fabrics and soil levels.
•
The washer pauses briefly throughout
each cycle. These pauses are normal for
washer operation.
•
Page 12 describes what happens during a
wash cycle.
Normal cycle
The Normal cycle features either WARM or
COLD water and longer spins to shorten
drying time. Select the 14-minute WARM
cycle to clean large loads of sturdily con-
structed fabrics that are heavily soiled.
Select the 10-minute COLD cycle to clean
cotton and linen fabrics that are moderately
to heavily soiled.
10
NORMAL
COLD 10
WARM 14
PULL START
Water temperature selector in Cycle Control Knob
Rinse
Spin
OFF
PUSH STOP

Cycle options

You may select a different wash time by first
selecting the water temperature (Warm or
Cold) and then turning to the new wash
time. For example, for 14 minutes of wash
time with Cold water:
1. Push in the Cycle Control Knob and turn
it clockwise to Cold.
2. Pull out the Cycle Control Knob and allow
your washer to fill.
3. When your washer has filled, push in and
turn the Cycle Control Knob to Heavy, 14
minutes of wash time.
4. Pull out the Cycle Control Knob.