Specifications; Important Safety Information - Pittsburgh 56368 Owner's Manual & Safety Instructions

Heavy duty jack stands
Table of Contents

Advertisement

Specifications

Model
Capacity
(Evenly distributed across two Stands.)
Approximate Height Range

Important Safety Information

Failure to heed these markings may result in
personal injury and/or property damage:
1.
Study, understand, and
follow all instructions before
operating this device.
2.
Do not exceed rated capacity.
3.
Use only on hard, level surfaces.
4.
Center load on saddle.
5.
Use as matched pair to support
one end of a vehicle only.
6.
Wear ANSI-approved safety goggles
and heavy-duty work gloves
during use.
7.
Do not use for aircraft purposes.
8.
Support vehicle only at manufacturer-
recommended locations.
9.
Inspect before every use;
do not use if parts loose or damaged.
Do not use if even a minor crack,
bend or other damage/deformation
appears. Discard Jack Stand
if damaged or deformed.
Page 2
*Evenly distributed across two Jack Stands.
For technical questions, please call 1-888-866-5797.
56371
3 Tons (6,000 lb.)*
11-3/4" – 16-3/4"
10. Keep work area clean.
Cluttered areas invite injuries.
11. Observe work area conditions.
Keep work area well lighted.
12. Keep children away. Children must
never be allowed in the work area.
13. Stay alert. Watch what you are doing,
use common sense. Do not operate
any tool when you are tired.
14. Do not use to support a
lawn mower or tractor.
15. Do not move or rock a vehicle
supported by stands.
16. The warnings, cautions, and instructions
discussed in this instruction manual
cannot cover all possible conditions
and situations that may occur. It must
be understood by the operator that
common sense and caution are factors
which cannot be built into this product,
but must be supplied by the operator.
56368
6 Tons (12,000 lb.)*
16-1/8" – 23-5/8"
Item 56368 56371

Advertisement

Table of Contents
loading

This manual is also suitable for:

56371

Table of Contents