Download Print this page

PISCO SVA20 Series Manual page 12

Push-in fitting incorporated type manifold solenoid valve

Advertisement

SOLENOID VALVE
SVA20 Series
Solenoid Valve
■ Solenoid Valve Specifications (AC100V)
Item
Valve Type
Valve Stracture
Rated Coil Voltage
Tolerance of Voltage Range
Pilot Valve
Power Consumption
Surge Protection Circuit
Manual Operation
Operating Pressure Range
Valve Type
Valve Stracture
Number of Position
Number of Port
Valve Function Single Solenoid Double Solenoid Si n gl e Sol e noi d ×2 Single Solenoid Double Solenoid Single Solenoid Double Solenoid
Main Valve
#
of pilot points
Response Time (*2) 18msec 12msec
Max. Operation Cycle
Min. Excitation Time
Lubrication
Operating Pressure Range
*1. There are two 3-port solenoid valves incorporated in one valve. Port 1(P) is common.
*2. Response Time represents the value at air pressure of 72.5psi (0.5Mpa) (OFF to ON) and that of 3-Position Solenoid Valve
represents the value from the neutral position with all ports blocked.
Series
Model
SVA 20S-100 SVA 20D-100 SVA 20A-100
2-Position
5-Port
1
50msec
30~100psi (0.2 ~ 0.7MPa)
SVA 20E-100
SVA 20T-100 SVA 20U-100 SVA 20V-100 SVA 20W-100
SVA 20R-100
SVA 20F-100
SVA 20P-100
SVA 20G-100
SVA 20H-100
Direct Acting Valve
Elastic Seal, Poppet Valve
AC100V
AC90 ~ 110V
1.5VA (with LED)
Diode
Non-Lock Push Button
30~100psi (0.2 ~ 0.7MPa)
Pneumatic Operation by Pilot Valve
Elastic Seal, Spool Valve
3-Position
3-Port×2 (*1)
2-Port
2
1
18msec
5Hz
Not Required
-14.5~100psi (-0.1 ~ 0.7MPa)
2-Position
3-Port
2
1
2
15msec
50msec
50msec

Advertisement

loading