3onedata IMC101GT Series Quick Installation Manual

IMC101GT Series
Industrial Media Converter
Quick Installation Guide
3onedata Co., Ltd.
Address: 3/B, Zone 1, Baiwangxin High Technology
Industrial Park, Xili,
Shenzhen
Website: www.3onedata.com
Tel: +86 0755-26702688
Fax: +86 0755-26703485
【Package Checklist】
Please check whether the package and accessories are intact
while using the media converter for the first time
1. Media converter (equipped with
terminal blocks)
3. DIN-Rail mounting attachment
5. Quick installation guide
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.
【Product Overview】
The product is full Gigabit industrial media converter. Models
are:
Model I IMC101GT-1GS (1 Gigabit copper port + 1 Gigabit
SFP)
Model II IMC101GT-1GF (1 Gigabit copper port + 1 Gigabit
fiber port)
【Panel Design】
Top view, bottom view and rear view

Front view

Nanshan District,
2. Certification
4. Warranty card
Model I
1. Grounding screw (protective ground)
2. Power supply input terminal
3. DIP switch
4. DIN-Rail mounting kit
5. Running status indicator
6. Power supply indicator
7. Copper port connection status indicator
8. Remote alarm indicator
9. Gigabit fiber port
10. Gigabit copper port
11. Gigabit SFP slot
【Mounting Dimension】
Unit: mm
Note before mounting:
Don't place or install the device in area near water or

moist, keep the relative humidity of the device
surrounding between 5%~95% without condensation.
Before power on, first confirm the supported power

supply specification to avoid over-voltage damaging the
device.
The device surface temperature is high after running;

please don't directly contact to avoid scalding.
【DIN-Rail Mounting】
Model II
For convenient usage in industrial environments, the product
adopts 35mm DIN-Rail mounting, mounting steps as below: