Gilson GX-271 Installation Qualification Procedures

Hide thumbs Also See for GX-271:

Table of Contents

Download this manual

Installation Qualification Procedures

GX-271 Liquid Handler

The Installation Qualification (IQ) procedures are aimed at end users who are implementing GLP-type requirements

and can be readily incorporated into proprietary Standard Operating Procedures (SOPs).

1. Instrument Identification

Manufacturer

Gilson, Inc.

3000 Parmenter Street

PO Box 620027

Middleton, WI 53562-0027 USA

Instrument Name

GX-271 Liquid Handler

Z-Arm

GX Solvent System (Optional)

GX Direct Injection Module (Optional)

GX Rinse Pump (Optional)

*Refer to the shipping label, located on each shipping container, for this information. Check that it matches the serial number on the instrument.

Gilson, Inc.

| PO Box 620027 | Middleton, WI 53562-0027 | Tel: 608-836-1551 OR 800-445-7661 | Fax: 608-831-4451

Gilson S.A.S.

| 19, avenue des Entrepreneurs | BP 145, F-95400 Villiers-le-bel, FRANCE

www.gilson.com

| sales@gilson.com | service@gilson.com | training@gilson.com

Serial Number*

Page 1 of 5 | LT375008-04

Table of Contents

Do you have a question about the GX-271 and is the answer not in the manual?

Page 1 | PO Box 620027 | Middleton, WI 53562-0027 | Tel: 608-836-1551 OR 800-445-7661 | Fax: 608-831-4451 Gilson S.A.S. | 19, avenue des Entrepreneurs | BP 145, F-95400 Villiers-le-bel, FRANCE Page 1 of 5 | LT375008-04 www.gilson.com | sales@gilson.com | service@gilson.com | training@gilson.com...
Page 2 Supplier Organization Address Phone Number Name of Service Technician User Organization Department Site (Room) Name Phone E-Mail Date of Installation LT375008-04 GX-271 Liquid Handler Installation Qualification Page 2 of 5...
Page 3 GX Direct Injection Module, GX Rinse Pump, and fraction collection valve. For technical specifications for the GX-271 Liquid Handler, refer to the Chapter 1, Introduction in the GX-271 Liquid Handler User's Guide. For technical specifications for an optional accessory, refer to its appendix in the GX-271 Liquid Handler User's Guide.
Page 4 Refer to the appropriate procedures in Chapter 2, Installation in the GX-271 Liquid Handler User's Guide. Plumbing Connections Refer to the appropriate procedures in Chapter 2, Installation in the GX-271 Liquid Handler User's Guide. For an optional accessory, refer to its appendix in the GX-271 Liquid Handler User's Guide.
Page 5 To obtain the firmware version for your records: 1. Install the Gilson Ethernet Utility. Refer to its documentation, if necessary. 2. Start the Gilson Ethernet Utility. Click the Start button and then select: All Programs > Gilson Applications > Utilities > Gilson Ethernet Utility.