Setting Up A Schedule; Status; Configuration - Ingrasys iPoMan 8000 User Manual

Using the web interface

Setting up a schedule

Click Schedule under Power Management
to see a list of schedules for turning power
outlets on or off as desired. For instance,
you may want to turn on all the servers and
the administrator's workstation every Mon-
day morning. The Schedule menu enables
you to do this automatically by setting up an
entry in the Schedule.
Click Add New to add a new schedule. Specify the type of
schedule, date, and time using the drop-down menus. Select the
outlets that you want to control and specify if you want to turn
the outlets on or off.

Status

Click Status under Environment to see the
status of the EMD connected to the
iPoMan 8000. The menu page displays the
temperature and humidity of the environ-
ment sensor, as well as the open/close con-
ditions of the EMD alarms.

Configuration

Click Configuration under Environment
to configure the EMD connected to the
iPoMan 8000. This menu enables you to set
up the sensor names, high and low set
points, calibration offsets for the sensors, as
well as alarm names and normal conditions.
You can also specify which EMD events
and alarm conditions cause which power
and digital outlets to be turned off.
iPoMan 8000 25