Adding Users; Changing Event Alert Settings - Ingrasys iPoMan 8000 User Manual

Adding users

Click Multi-User under System to create a
list of users who can access and control the
iPoMan 8000. You can add users who can
only view the iPoMan 8000 status or users
who can change the outlet status of the
iPoMan 8000.
Click Add New to add a new user to the list
and specify the user name, password, and the outlet privileges for
each user using the drop-down boxes. The new user gets added
to the list on the Multi-User page. If you want to modify or
delete a user entry, click Edit or Delete for the appropriate user in the list.

Changing event alert settings

The iPoMan 8000 sends email or SNMP trap alerts to specified users when
specific events occur. Use the following steps to set up these alerts:
• Click Trap Receivers under System to
set up a list of users or workstations
who will be alerted with an SNMP trap
message. Use this menu page to spec-
ify the IP addresses of up to 8 trap
receivers, community information,
type of trap, severity of trap, and
description of the events that cause the
traps.
• Click Email Notification under Sys-
tem to set up a list of up to 8 users who
will be alerted with an email. Use this
menu to specify the mail server, user
account, DNS, and other information
necessary to set up a mail server for
sending mail alerts. Use the Email
Receivers Table to add the Email
addresses.
iPoMan 8000
Using the web interface
23