Schedule Setup; Schedule Display Mode - Trane X13511538-01 Installation And Operation Manual

•
•
•
•
•
•

Schedule Setup

Schedules can be used to set the day/time/periods and to set the fan and setpoints.This section
describes the following:
•
•
•
When setting either the day/period/time schedule or setpoint schedule, refer to
default settings and worksheet.

Schedule Display Mode

This display mode is used to view current settings such as setpoints, periods, and day of the week
as shown in the illustration below. When in Schedule Display Mode, the user cannot change
settings.
•
•
•
•
•
BAS-SVX44A-EN
When starting/activating TOV, the
Quick TOV Active Mode will show Occ (
Occ/UnOcc will be blank.
In Quick TOV Active Mode, the typical display will show the TOV time remaining as HH:MM
(Hours:Minutes) for 45 seconds. After the 45 seconds, the display will cycle to Time of Day with
AM/PM for 10 seconds, followed by HH:MM for 5 seconds, and continue repeating Time of Day
and HH:MM until time expires or Cancel.
In User Configurable TOV Active Mode, the typical display will show DD:HH (DD is days and
HH is Hours). After the 45 seconds, the display will cycle to Time of Day with AM/PM for 10
seconds, followed by Days (for 3 seconds) if 1 day or more TOV time left, HH:MM (for 5 seconds),
and continue repeating Time of Day, Days, and HH:MM until time expires or Cancel.
During a power outage, if the unit was in TOV Mode, it will return to the last TOV settings when
power is returned.
TOV is not available in non-programmable mode (refer to Installation Option Number 0140).
Schedule display mode
Day/period/time schedule change mode
Setpoint/fan schedule change mode
A C E J
From the Home screen, touch
Touch any of the
selected is displayed in an inverse graphics (similar to the Tu weekday as shown). Only one day
or day group can be selected at one time. Day groups are determined by Installation Option
Number 0233.
Touch any
For Auto H/C systems, touch
will blink depending on which setpoint is being displayed.
Touch cancel ( ) to exit Schedule Display mode or after 20-second time out.
displays solid indicating that TOV is ACTIVE.
) icon while User Configurable TOV Active Mode
to enter Schedule Display mode.
icons to view the day or day group schedule. The day
to view its current schedule. The current period will blink.
or to toggle between Cool or Heat setpoints. Either icon
Functions
Table 8, p. 35 for
31