Step 2: Gteclink Main Menu - SLOPE INDICATOR GTecLink Manual

2.2 STEP 2: GTecLink main menu

1) Node info:​ Basic information about the node (version, ID, temperature, etc.).
2) Sensors data: Access to real time sensor readings and downloaded data stored in the node.
3) Node Configuration: ​ A ccess this menu to configure the node.
a) Change node ID: Optional. Change node ID and use a different number.
b) Set date and time.
c) Setup wizard: sensor and radio configuration
4) Factory Reset: ​ T his option resets the configuration parameters and removes all stored data. This
feature is designed to allow the node to be used in different sites. We do not recommend using it
for other purposes unless suggested by DGSI Technical Support.
To access node configuration, go to "​ N ode configuration​ " from the main menu and then "​ S etup Wizard​ " .
GTecLink Datalogger Manual
13