Velleman MICROBIT User Manual page 12

8.2 Project 2 – Smart Light
A smart light for smart Tinkerers!
1 micro-USB cable
2 micro:bit
3 PIR sensor
What do I need?
 1x micro:bit
 1x micro-USB cable
 1x BoB
 1x PIR sensor
 1x LED
 2x female-female jumper wires
Let's get started!
Step 1
 Insert the micro:bit into the BoB and connect the PIR sensor into pin 0 (P0).
 Connect the LED to pin 1 (P1). Make sure for both components that the colour of the wires matches the
colours of the pins (S = yellow, V (3V3) = red, G = black).
V. 01 – 17/01/2019
VMM502
4 BoB
5 LED
12 ©Velleman nv