Bosch DSDA ISCSI DISK ARRAY SERIES DSA-N2B20 Installation Manual page 15

DSDA iSCSI Disk Array Series
27. The changes are summarized on the Commit screen.
28. In the navigation panel, select Filer > Use Command Line.
29. Enter vol add vol0 1 (or replace vol0 with the volume to which you want to add the disk).
30. A warning displays. Enter y (yes) to confirm the action.
31. Click Disconnect to disconnect from the command line console.
CAUTION!
!
If the settings made here are altered later, all data stored on the disks is lost as the RAID
group needs to be reconstructed.
Bosch Security Systems
Click Commit to apply the new settings.
By default, one disk is left as a spare disk. If no spare disk is needed, this disk can be
added to the volume manually. To do so, please continue with step 28.
If you would like to keep the spare disk, please continue with step 32.
A message confirms that the disk has been added.
Installation Guide
Configuration through the Web Interface | en 13
V 1 | 2008.08