Bosch DSDA ISCSI DISK ARRAY SERIES DSA-N2B20 Installation Manual page 11

DSDA iSCSI Disk Array Series
2.
NOTICE!
i
The IP address 10.10.10.9 is an example. The IP addresses 10.10.10.10 and 10.10.10.11 are
the default IP addresses for the storage system and cannot be used otherwise.
3.
4.
Bosch Security Systems
Select from the Control Panel of your computer Network Connections, Properties.
Here, configure your network interface to use IP address 10.10.10.9 with Subnet mask
255.0.0.0.
Example screen:
Connect your computer directly to the network port labeled e0a on the storage system,
using a crossover cable.
Alternatively, connect your computer to the network the storage system is connected to.
Open a Web browser and enter http://10.10.10.10/na_admin.
You will be asked to log in.
Installation Guide
Configuration through the Web Interface | en 9
V 1 | 2008.08